• Matte Maroon, 1ea
  • Matte Maroon, 1ea
  • Matte Maroon, 1ea
1 3

petsupply365com

Andis AGC Super 2-Speed Clipper with T-84 Detachable Blade

SKU: PT0103722330

Matte Maroon, 1ea

$241.02 USD
$192.41 USD $241.02 USD
Sale Sold out

Professional 2-speed 3400/4400spm maintenance free, cool running rotary motor clipper equipped with Full Body clipping blade, Size T-84. Features detachable blade system, shatter-proof housing, 14' heavy-duty cord, How-To DVD and storage case.

Dimension

  • Product Gross Weight: 4.5000 lb
  • Product Net Weight: 4.5000 lb
  • Product Height: 12.00 in
  • Product Length: 3.00 in
  • Product Width: 8.00 in
  • Recommended For: Equine and livestock grooming

Instruction

  • Use Instructions: Please read the following instructions before using your new Andis clipper. Give it the care that a fine precision built instrument deserves and it will give you years of service. Plug cord into electrical outlet, operate 230-240 volt, 50 cycle AC electrical current or as noted on unit.SPEED SELECTIONYour Andis clipper comes with either normal or normal AND high speed operation. Use the normal setting (#1) for most cutting needs. Use the high speed setting (#2) for cutting through heavy coats. To start clipper move switch button by pressing down on the lock mechanism and moving to the desired position. To stop, press down on the lock mechanism and move switch button back to original position. After using your Andis clipper, rewrap cord, and store in a safe place.
  • Care and Cleaning Instructions: Blades should be oiled before, during, and after each use. If your clipper blades leave streaks or slow down, it’s a sure sign blades need oil. Place a few drops of oil on the front and side of the cutter blades (Diagram F). Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant. Always replace broken or nicked blades to prevent injury. You can clean the excess hair from your blades by using a small brush or worn out toothbrush. To clean the blades, we suggest to immerse the blades only into a shallow pan of Andis Clipper Oil, while the clipper is running. Any excess hair and dirt that has accumulated between the blades should come out. After cleaning, turn your clipper off and dry blades with a clean dry cloth and start clipping again. If upon cleaning your blades you find that the blades will still not cut, there may be a few fine pieces of hair trapped between the upper and lower blade. If this happens, you will need to snap the blade off the clipper. Proceed to slide the upper blade to one side, without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surface between the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring. Now slide the upper blade to the opposite side of the lower blade and repeat this process. After completing this procedure, slide the upper blade, centering it over the lower blade. Handle or store your Andis clipper with the blades down so excess oil will not run into the clipper case.

Safety

  • Caution: This product not for use by children
  • Safety Warnings: To reduce the risk of electric shock:1. Do not reach for an appliance that has fallen into water. Unplug immediately. Never use clipper near water.2. Do not use while bathing or in a shower3. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.4. Always unplug this appliance from the electrical outlet immediately after using. Unplug by holding and pulling on plug, not cord.5. Unplug this appliance before cleaning, removing, or assembling partsWARNING: To reduce the risk of burns, fire, electric shock, or injury to persons:1. An appliance should never be left unattended when plugged in2. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experienceand knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved3. Children shall not play with the appliance4. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Andis.5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an Andis Authorized Service Station for examination or repair.6. Keep the cord away from heated surfaces7. Never drop or insert any object into any opening8. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.9. Do not use this appliance with a damaged or broken blade or comb, as injury to the skin may occur10. To disconnect turn control to “0” then remove plug from outlet11. WARNING: During use, do not place or leave appliance where it may be (1) damaged by an animal or (2) exposed to the weather12. Oil blades frequently. Blades may become hot during use. Check often to prevent burning animal.13. Keep the appliance dry

Specifications

  • Blade Material: Carbon Steel
  • Power Source: Electric
  • Voltage: 120 Volts