• Chalk White, 1ea
1 1

PREVUE PET PRODUCTS INC

Prevue Pet Products 3152 Select Series Wrought Iron Bird Cage

SKU: PT0160031522

Chalk White, 1ea

$526.52 USD
$420.81 USD $526.52 USD
Sale Sold out

Prevue Pet Products Wrought Iron Select Cage 3152BLK in Black Hammertone offers quality craftsmanship at an affordable cost. Constructed of wrought iron with a cagetop playstand to keep your bird entertained and content, the heavy-duty push button lock keeps your bird securely inside its cage when playtime is over. This select bird cage also includes four stainless steel cups, two wood perches and a castered stand for portability. Both trays and bottom grille are removable for ease of cleaning while the rounded corner seed guards control mess around the cage. Our Wrought Iron Select Cage in Black Hammertone measures 24 long, 20 wide, 60 high with 3/4 wire spacing.

Dimension

  • Product Gross Weight: 67.5000 lb
  • Product Net Weight: 67.5000 lb
  • Product Height: 25.00 in
  • Product Length: 8.00 in
  • Product Width: 49.00 in

Instruction

  • Assembly Instructions: 1. Attach casters to Legs of front (F) and back (B) panels.2a. THIS STAGE IS EASIER WITH TWO PEOPLE. Left side tower (L1) and right side tower (R1) panels are interchangeable. Channels on (L1) and (R1) face interior of cage. Have one person hold (F1) panel upright while second person installs (L1) and (R1) panels,(L1) and (R1) panels have tabs at the bottom corners. These tabs correspond to sleeves on the Legs of (f) and back (B) panels. Slide the tab on bottom corner of Left side. Lower (L1) pane into the sleeve on the leg of (F1). Secure (L1) to (F) with Long hex screw.2b. Following the same procedure, attach right side. Lower (R1) panel to front (F) panel and attach (Li) and (R1) panel to back (B) panel inserting tabs into sleeves and securing with Long hex screws.3. After Lower cage has been assembled, slide the grille (G) and tray (T) into their tracks. To keep the grille securely in place. a safe-clip is included. Locate the short horizontal bar on- the panel under the grille, and centered directly under the grille handle. Hook the open ends of the safe-clip onto the short horizontal bar. Hook the upper part of the safe-clip over the handle on the grille.4a. THIS STAGE IS EASIER WITH TWO PEOPLE. Left (L2) and right (R2) side panels are interchangeable. For these instructions, (R2) is the panel with the cup doors. Make sure cup doors swing out (not into cage). Side (L2) and (R2) panels slide into tracks along (F) and (B) panel frames. Three vertical wires on (L2) and (R2) panels extend below Lower horizontal wire. Align wires with corresponding holes along top surface of (L1) and (R1) side panels. It extended wires are bent, straighten with needle nose pliers.4b. Playtop (PT1) frame (shipped with playtop tray (PT2) in place) fits over top of cage. Posts extend down from corners and correspond with openings on (F) and (B) panels. Three vertical wires on ([2) and (R2) panels extend above upper horizontal wire. Align wires with corresponding holes along bottom of IPT1) frame. Secure top to frame with short hex screws.5. Before assembling the full playtop unit, this is a good time to add cup holders and stainless steel cups to the side panel cup doors, and to install the longer (243/”L) wooden dowel perch6a. PLAYTOP UNIT for JEWELTONE COLOR MODELS:Attach two Ladders to back edge of playtop with one short hex screw for each. Attach cup/perch bar to ladders with one short hex screw at the top of each ladder. Attach two ladders to front edge of playtop and front edge of cup/perch bar. Slide shortest (21 3/4” L) perch onto cup/perch barInsert short cups into holders on cup/perch bar.6b. PLAYTOP UNIT for HAMMERTONE COLOR MODELS:U-bar ships as two pieces. Assemble U-bar and attach to back edge of playtop frame with two long hex screws. Attach cup/perch bar to U-bar with two short hex screws. Slide shortest (21¾”L) perch onto cup/perch bar. Insert short cups into holders on cup/perch bar. Install Ladder. Top posts on ladder correspond with holes on face of cup/perch bar. Bottom posts correspond with holes on front top edge of playtop frame.7. THIS STAGE IS EASIER WITH TWO PEOPLE. Left and right side seed guards (SG1) are interchangeable. (SG1) guards have tabs at the corners which fit into sleeves on the legs of front/back (F/B) panels. Slip guards into place. Front seed guard (SG2) panel has a notch at the center of the front base edge. Slide (SG2) guard into place. With first person holding (SG2) guard in position, second person aligns holes at the corners and secures guards together with screw & nut pairs. Use same procedure with back seed guard (SG3).

Safety

  • Safety Warnings: Inspect the product periodically and remove from use if it becomes worn or damaged

Specifications

  • Bird Cage Access Doors: 3 Count
  • Cage Height with Playtop Open: 65 Inches