• Metal, 1ea
1 1

MILLER MANUFACTURING COMPANY

Allied Bucket Heater

SKU: PT0160107421

Metal, 1ea

$0.50 USD
$0.00 USD $0.50 USD
Sale Sold out

Designed to heat water as opposed to de-icing water, this powerful bucket heater will heat the water to over 180 degrees F. A stainless steel guard protects the durable heating element. Water can be heated towards boiling, depending on the bucket's volume and insulation. It comes with a 6-foot cord and is designed to rest easily inside a 5 gallon bucket. The heater is thermostatically controlled with over-temperature protection. For use in water only.Will not damage plastic containers. LOCKNDRY compatible. 1000 Watts, 120 Volts, 60 Hz. UL Listed. CSA Listed. One year warranty.

Dimension

  • Product Gross Weight: 1.0000 lb
  • Product Net Weight: 1.0000 lb
  • Product Height: 3.00 in
  • Product Length: 14.00 in
  • Product Width: 3.00 in

Instruction

  • Care and Cleaning Instructions: Periodically remove excess lime build-up from the heating element using a liquid lime remover. A thick build-up of lime (greater than 1 /32 thick) may cause the heating element to burst. This may send a dangerous amount of electrical current into the water

Safety

  • Safety Listing: UL Listed
  • Safety Warnings: Do not use in hot tubs.DO NOT COMPLETELY IMMERSE THIS PRODUCT IN WATER. The handle and power cord are not designed to withstand boiling water. Always keep the handle and power cord out of water.Before use, inspect the heater for any excessive lime build-up, cracks in the heating element, or other damage or wear. Discontinue use immediately if any aw is observed.Connect only to properly grounded, 120 VAC, Ground Fault Circuit Interrupter (GFCI) protected outlet.Never operate this heater without the guard securely in place over the heating element. If operated without the guard in place a re hazard will result.Always unplug this heater before you remove it from the water or before leaving it unattended.The silver-colored stainless steel tube contains a thermal-overload safety switch. Always be sure this tube is tightly connected to the black heating element. If a gap occurs between this tube and the heating element, a re hazard will result.This heater contains a thermal overload switch. If the thermostat fails, the heater will permanently shut o to prevent a rehazard.Prevent unit from directly contacting persons or animals

Specifications

  • Cord Length: 72 Inches
  • Floating or Submersible: Submersible
  • Power Source: Electric
  • Thermostat Controller: Yes
  • Wattage: 1000 Watts