• Black, 1ea
  • Black, 1ea
  • Black, 1ea
  • Black, 1ea
1 4

ANDIS COMPANY

Andis Pro-Animal EBC Detachable Blade Clipper

SKU: PT0103753315

Black, 1ea

$0.50 USD
$0.00 USD $0.50 USD
Sale Sold out

MBG-4 Pro Animal EBC Clipper. Corded detachable blade clipper includes #10 UltraEdge blade. Single speed with 14' cord.

Dimension

  • Product Gross Weight: 1.5000 lb
  • Product Net Weight: 1.5000 lb
  • Product Height: 3.00 in
  • Product Length: 10.00 in
  • Product Width: 10.00 in
  • Recommended For: Clipping on fine to medium hair breeds

Instruction

  • Use Instructions: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Before starting clipper, remove blade guard (some models may not have a blade guard). Plug cord into electrical outlet, operate at 120 volt, 60 cycle AC electrical current or as noted on the unit. To start clipper, move switch button to ON position. To stop clipper, move switch button back to original position. After using your clipper, rewrap cord and store in a safe place.USING THE ATTACHMENT COMBS(Some models do not have combs and sizes will vary by kit)You can set the blades for a longer cut by using any of the attachment combs made for your Andis clipper. The combs mount easily; simply slip the cutter bladeteeth into comb and snap the comb down (Figures A & B). To remove, simply snap off. These attachment combs guide hair into the blades and give you precisecontrol of hair lengths. The length of trim is indicated on the attachment comb. Use the chart to find the approximate lengths of cut. Different blade angles in relation to the skin, thickness and texture of the hair will vary the cutting length.REMOVING BLADE SETTo remove blade set, first make sure your clipper motor is switched “Off”. Push blade release mechanism under blade hinge (Figure C). While holding down theblade release mechanism, push down on blade, then gently pull the blade forward and slide it off the blade hinge. If your blade hinge should snap closed and is flush with the clipper, use a small standard screwdriver to pry the tongue of the hinge out. NOTE: Hair may accumulate in the front cavity of the housing under the blade. If this happens, you can clean out the hair by brushing out the cavity with a small brush or an old toothbrush while the blade is off the clipper.REPLACING OR CHANGING BLADE SETTo replace or change your blade set, slide the blade bracket onto the hinge of the clipper and with the clipper turned “ON”, push the blade towards the clipper to lock into position.
  • Care and Cleaning Instructions: Blades should be oiled before, during, and after each use. If your clipper blades leave streaks or slow down, it’s a sure sign blades need oil. Place a few drops of oil on the front and side of the cutter blades (Diagram F). Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant. Always replace broken or nicked blades to prevent injury. You can clean the excess hair from your blades by using a small brush or worn out toothbrush. To clean the blades, we suggest to immerse the blades only into a shallow pan of Andis Clipper Oil, while the clipper is running. Any excess hair and dirt that has accumulated between the blades should come out. After cleaning, turn your clipper off and dry blades with a clean dry cloth and start clipping again. If upon cleaning your blades you find that the blades will still not cut, there may be a few fine pieces of hair trapped between the upper and lower blade. If this happens, you will need to snap the blade off the clipper. Proceed to slide the upper blade to one side, without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surface between the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring. Now slide the upper blade to the opposite side of the lower blade and repeat this process. After completing this procedure, slide the upper blade, centering it over the lower blade. Handle or store your Andis clipper with the blades down so excess oil will not run into the clipper case.

Safety

  • Safety Warnings: DANGER: To reduce the risk of electric shock:1. Do not reach for an appliance that has fallen into water. Unplug immediately.2. Do not use while bathing or in a shower3. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.4. Except when charging, always unplug this appliance after use5. Unplug this appliance before cleaning, removing or assembling partsWARNING: To reduce the risk of burns, fire, electric shock, or injury to persons:1. An appliance should never be left unattended when plugged in2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.3. Children should be supervised to ensure that they do not play with the appliance4. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Andis.5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an Andis Authorized Service Station for examination and repair.6. Keep the cord away from heated surfaces7. Never drop or insert any object into any opening8. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered9. Do not use this appliance with a damaged or broken blade or comb, as injury to the skin may occur10. To disconnect turn control to OFF then remove plug from outlet11. WARNING: During use, do not place or leave appliance where it may be (1) damaged by an animal or (2) exposed to the weather12. This appliance is intended for trimming purposes only

Specifications

  • Blade Material: Carbon Steel
  • Power Source: Electric
  • Voltage: 120 Volts