Andis Pulse Li 5 Cord/Cordless Clipper
SKU: PT0103773515Blue, 1ea
Regular price
$198.50 USD
Regular price
$158.40 USD
Sale price
$198.50 USD
Unit price
per
LCL-2 Cord/Cordless Clipper w/adjustable blade from sizes #9-#40. 2 hour run time.
Dimension
Dimension
- Product Gross Weight: 1.4000 lb
- Product Net Weight: 1.4000 lb
- Product Height: 2.63 in
- Product Length: 9.75 in
- Product Width: 6.00 in
- Recommended For: Used for trimming ears, muzzle, bridle path and fetlocks on horses. Great for tidying face, feet, and finishing work on all dog hair types and full-body grooming on small and medium size breeds.
Instruction
Instruction
- Battery Required: Yes
- Batteries Included?: Yes
- Use Instructions: CHARGING CLIPPERThe 4.5V 1.2A AC adapter is only intended for use with Andis Model LCL/LCL-2 lithium-ion clipper. Remove the clipper and AC adapter from the carton. Plug the AC adapter into a 100-120V, 50-60 cycle AC outlet, or as noted on the unit. Plug the adapter cord directly into the receptacle on the bottom of the clipper. The clipper ON/OFF switch must be in the OFF position for the battery to charge. The green light on the clipper will turn ON when the clipper is charging. When clipper is fully charged, the green light will turn OFF. The clipper has not been charged at the factory. Please charge the clipper for 3-5 hours before FIRST use for maximum performance. When battery is fully charged, clipper can be used for up to 2 hours of continuous run time. After first use, clipper will fully charge in aminimum of 90 minutes.FAILURE TO CHARGE1. Make sure voltage is present at the wall outlet (confirm with an appliance you know is working)2. Make sure ON/OFF switch on the clipper is OFF3. Check to make sure adapter cord is plugged firmly into clipper4. If failure to charge still exists, return clipper to Andis or an Andis authorized service station for examination and repair or replacementCORDED OPERATIONIf the clipper powers OFF in the middle of a clipping job, the adapter cord can be attached to continue use in corded operation. When the clipper is running with the adapter cord attached, the green light will remain ON if the battery is not fully charged. The clipper will not charge while in use with the cord attached. After using your Andis clipper, rewrap cord loosely and store in a safe place.USING THE ATTACHMENT COMBS(Some models do not have combs and sizes will vary by kit)You can set the blades for a longer cut by using any of the attachment combs made for your Andis clipper. The combs mount easily; simply slide the cutter blade teeth into comb and slide the comb down. To remove, simply slide off. These attachment combs guide hair into the blades and give you precise control of hairlengths. The length of trim is indicated on the attachment comb. Different blade angles in relation to the skin, thickness and texture of the hair will vary the cutting length.CLIPPER BLADE ADJUSTMENTYour Andis adjustable clipper blade set is easy to adjust. From coarse to fine cuts, all that is needed is an easy change of the adjustment lever with your thumb. Lines on the clipper indicate the five cutting positions. For the shortest cut, use your thumb to align the lever with the shortest line on the clipper housing. To cut the least amount of hair, align the lever with the longest line on the clipper housing.
- Care and Cleaning Instructions: Blades should be oiled before, during, and after each use. If your clipper blades leave streaks or slow down, it’s a sure sign blades need oil. Place a few drops of oil on the front and side of the cutter blades (Diagram F). Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant. Always replace broken or nicked blades to prevent injury. You can clean the excess hair from your blades by using a small brush or worn out toothbrush. To clean the blades, we suggest to immerse the blades only into a shallow pan of Andis Clipper Oil, while the clipper is running. Any excess hair and dirt that has accumulated between the blades should come out. After cleaning, turn your clipper off and dry blades with a clean dry cloth and start clipping again. If upon cleaning your blades you find that the blades will still not cut, there may be a few fine pieces of hair trapped between the upper and lower blade. If this happens, you will need to snap the blade off the clipper. Proceed to slide the upper blade to one side, without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surface between the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring. Now slide the upper blade to the opposite side of the lower blade and repeat this process. After completing this procedure, slide the upper blade, centering it over the lower blade. Handle or store your Andis clipper with the blades down so excess oil will not run into the clipper case.
Safety
Safety
- Caution: Keep away from children
- Safety Warnings: DANGER: To reduce the risk of electric shock:1. Do not reach for an appliance that has fallen into water. Unplug immediately.2. Do not use while bathing or in a shower3. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.4. Except when charging, always unplug this appliance after use5. Unplug this appliance before cleaning, removing or assembling partsWARNING: To reduce the risk of burns, fire, electric shock, or injury to persons:1. An appliance should never be left unattended when plugged in2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.3. Children should be supervised to ensure that they do not play with the appliance4. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Andis.5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an Andis authorized service station for examination and repair.6. Keep the cord away from heated surfaces7. Never drop or insert any object into any opening8. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered9. Do not use this appliance with a damaged or broken blade or comb, as injury to the skin may occur10. To disconnect turn control to OFF then remove plug from outlet11. Plug adapter cord directly into an AC outlet. Do not use an extension cord.12. Use of an adapter cord or plug not sold by Andis may result in risk of fire, electric shock, or injury to person13. Do not disassemble adapter cord or plugs. Incorrect reassembly may result in a risk of electric shock or fire. When repair is required, send or take it to an Andis authorized service station.14. The battery in this clipper is designed to provide maximum trouble-free life. However, like all batteries, it will eventually wear out. Do not attempt to replace battery. When repair or replacement is required, send or take it to an Andis authorized service station.15. Batteries can be harmful to the environment if disposed of improperly. Many communities offer recycling or battery collection. Contact your local government about disposal practices in your area.16. WARNING: Never touch both terminals on clipper with metal objects and/or body parts, as short circuit may result. Failure to comply with these warnings could result in fire or serious injury.17. During use, do not place or leave the appliance where it is expected to be: 1) Subject to damage by an animal, or 2) Exposed to weather18. Unplug charger before plugging or unplugging appliance19. WARNING: Risk of fire, explosion, or burns. Do not crush, disassemble, heat above 100°C, incinerate
Specifications
Specifications
- Power Source: Battery Powered
- Voltage: 240 Volts