• Black, 1ea/18 in
  • Black, 1ea/18 in
1 2

LIFETIME PRODUCTS LLC

Aquatic Life Endcap for Hybrid T5HO LED Mounting System

SKU: PT0145801555

Black, 1ea/18 in

$47.37 USD
$37.50 USD $47.37 USD
Sale Sold out

Decorate Endcap to conceal the power cords on the sides of the Aquatic Life T5HO Hybrid light fixture. Includs two endcaps.

Dimension

  • Product Gross Weight: 1.3500 lb
  • Product Net Weight: 1.3500 lb
  • Product Height: 23.00 in
  • Product Length: 4.00 in
  • Product Width: 1.00 in

Instruction

  • Assembly Instructions: 1. Remove four Philips screws to remove the original endplate2. Install the new endplate using the same four screws that were removed3. The new endplate has four additional holes. The two outer holes will accommodate the sheet metal screws. The two inner holes will use the screws with nuts.4. Important: Before installing the Decor Endcap, thread each of the outer sheet metal screws into the holes in the new metal endplate. When the screws are halfway into the hole, remove them for next step.5. Place the fixture power cord in the lower channel and the LED cords in the upper channel. The LED cords will route through the “U” cutouts on top of the endplate.6. Position the décor endcap over the four open holes on the new endplate7. Using the metal (pointed) screws, attach the endcap using the two outer holes. These are the holes that were pre-threaded in step 4.8. Place the non-pointed screws in the two middle holes and secure with nuts9. Repeat steps for other end of fixture

Specifications

  • Accessory type: End Cap
  • Compatible With: Aquatic Life Hybrid Fixtures with 18 End Plates