• 1ea
1 1

AQUATOP

Aquatop MR-20 Media Reactor with Pump

SKU: PT0138201403

1ea

$60.54 USD
$48.03 USD $60.54 USD
Sale Sold out

AQUATOP's MR-20 Multimedia Reactor maximizes the efficiency of filter media with a reverse water flow design that eliminates water channeling through the filter media. Install in sump or hang on the tank, this versatile reactor can be used for phosphate resins, phosphate sponges, activated carbon, nitrate sponges, and other resin filter media. The high quality acrylic design makes this one of the most reliable media reactors available, and the MR-20 includes a pump and all the necessary plumbing.

Dimension

  • Product Gross Weight: 2.0000 lb
  • Product Net Weight: 2.0000 lb
  • Product Height: 3.50 in
  • Product Length: 15.00 in
  • Product Width: 2.50 in
  • Capacity: 10 - 75 Gallons

Instruction

  • Assembly Instructions: 1. Choose a desired location for the AQUATOP Media Reactor2. Connect the intake tube to the middle barbed fitting of the AQUATOP Media Reactor. Secure the tube to the lock nut.3. Connect a small piece of tubing from the bottom of the intake tube to the water pump4. Connect the output tube to the output barbed fitting of the AQUATOP Media Reactor. Secure the tube to the lock nut.5. Connect the sediment discharge filter to the end of the output tubing6. Remove the lid by twisting counter clockwise7. Add desired media to the reaction chamber phosphate resin, activated carbon, and other resin filtering medias. Follow manufacturer guidelines for media requirements fora given aquarium size, flow rates and precautions.8. Place media sponges and media strainers below and above desired media9. Place the lid back by twisting clockwise10. Plug the water pump into a GFCI (Ground Fault Circuit Interrupter) outlet

Safety

  • Caution: Keep this product away from children
  • Safety Warnings: To avoid possible electric shock, special care should be taken since water is employed around the use of this product. For each of the following situations, do not attempt to repair yourself: return the appliance to an authorized service facility for service or properly discard the appliance.WARNING: This product may contain chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Wash your hands after handling the product.NOTE: It is your sole responsibility to verify that the plug and the receptacle are clean and free of moisture and salt buildup at all times. The receptacle must be free of water, salt, calcium, magnesium and dust. Failure to do so can cause fire, damage to property, and permanent damage to the product and personal injury not limited to loss of life.NOTE: Before installing the unit, check for any signs of damage to the device. If there are any signs of damage to the device, power cable or plug, do not use and return to place of original purchase.1. Read and follow all instructions2. A drip loop must be used with all electrical aquarium devices. A drip loop is a self-made part of the cord hanging below the receptacle.3. A GFCI (Ground Fault Circuit Interrupter) should be used in the branch circuit supplying all power to water pumps and electrical aquarium equipment. If you do not have a GFCI, we strongly recommend having a qualified electrician install one prior to operating any aquarium component.4. Do not plug into extension cord/power strip5. Use this product for its intended purpose only6. Never yank or pull the cord from the electrical outlet7. Do not operate if the plug or wire is damaged8. Verify that hands are dry prior to disconnecting the power9. To reduce the risks of electrocution, keep all connections dry10. For indoor use only11. If any of the electrical components get wet, unplug immediately12. Do not use soaps or detergents when cleaning the exterior surface of this device13. Make sure the device is completely dry before connecting

Specifications

  • GPH: 95 Gallons