Skip to product information
1 of 1

SEACHEM LABORATORIES INC

aquavitro Salinity for Reefs Salt Mix

SKU: PT0167175820

1ea/120 Gal Bucket

Regular price $54.58 USD
Regular price $43.26 USD Sale price $54.58 USD
Sale Sold out

salinity is a blend of salts specifically formulated for the reef aquarium that contains all essential major, minor, and trace components found in natural reef waters, but contains no toxic or non-essential components. Additionally, salinity is the most concentrated salt blend on the market. With a hydration level of <0.5% salinity will yield a greater volume of prepared saltwater at a salinity of 35° per unit of weight than any other salt mix currently on the market.

Dimension

  • Product Gross Weight: 37.7300 lb
  • Product Net Weight: 37.7300 lb
  • Product Height: 12.19 in
  • Product Length: 12.62 in
  • Product Width: 12.62 in

Instruction

  • Use Instructions: 1. Mix salinity with dechlorinated tap or purified water. We recommend the use of a commercial dechlorinator like alpha™ to neutralize any tap water chlorine and/or chloramines. If source water quality is poor we recommend purification with a Seachem Pinnacle™ RO/DI system. To prepare small quantities, add 36 grams per 1 liter of water. [This is a little less than 1/2 cup of salt per US gallon of water. For 15 gallons use 7 cups of salinity™.]2. Stir well to ensure a good mix. Although the salinity™ solution may be used immediately, we suggest mixing for approximately 24 hours to achieve oxygen/carbon dioxide equilibrium.3. Measure the salinity. We recommend a salinity of 35‰. This will be a temperature compensated SG (specific gravity) value of 1.026. If you are using uncorrected SG values (H) then the following formula will yield a value for S (salinity) accurate to within 1%:S = [0.3348 * T] + [1325 * H] - 1330.4525 (calibrated at 15.56 °C (60 °F))S = [0.2211 * T] + [1325 * H] - 1330.4525 (calibrated at 25 °C (77 °F))where S is the salinity in parts per thousand; T is temperature in degrees centigrade (range of 13-30 °C); and H is the uncorrected hydrometer reading. If you don't mind an error on the order of ±3%.4. Adjust salt level accordingly. If salinity is too low, then add more salinity™. If too high, add more water.5. Change 20% of aquarium water every two weeks (or as necessary) to maintain optimum water qualityUSAGE NOTE: NEVER mix salt in an aquarium containing livestock. Transfer livestock to the aquarium AFTER salt is completely mixed and specific gravity has been adjusted. Use Seachem's Stability® to avoid new tank syndrome and to prevent unnecessary livestock losses in a new system

Safety

  • Caution: Not for human consumption. Keep out of reach of children.
  • Safety Warnings: Contact in dry form may cause skin or eye irritation. In case of eye contact, completely flush eye(s) with cool water and seek medical attention.

Specifications

  • Benefits: 1. Optimized for reef environments2. Most concentrated salt available3. Batch specific guaranteed analysis4. Enhanced buffering inhibits pH shift
  • pH Balance: 8.4 - 8.6 pH pH
  • Specific Gravity Range: 1.026