• Black, 1ea
1 1

EUGENE G DANNER MANUFACTURING

Danner EZ Clean Internal Aquarium Single Filter

SKU: PT0172501155

Black, 1ea

$48.95 USD
$38.76 USD $48.95 USD
Sale Sold out

Mounts on lnner corner of aquarium. Mechanical, biological and chemical filtration. Single cartridge system with changeable media. Unique top loading cartridge design. Hands do not get wet when changing the filter elements. Innovative water-change feature that uses the pump motor to remove water. No Need to purchase a separate siphon for water change. Includes aeration induction feature. For aquariums up to 30 gallons. Patent Pending.

Dimension

  • Product Gross Weight: 3.2500 lb
  • Product Net Weight: 3.2500 lb
  • Product Height: 9.00 in
  • Product Length: 8.00 in
  • Product Width: 6.00 in
  • Recommended For: Aquarium

Instruction

  • Use Instructions: 1. Unpack filter and lay out all parts. Note that this instruction sheet is used for various models so images may differ slightly from your unit. You will need to determine where you will be mounting the filter in your aquarium.2. There are two options to secure filter to aquarium. Filter can be mounted to a back and side walls of the aquarium using all four suction cups or with a combination suction cups and hanging bracket. The hanging bracket will keep the top of the filter at water surface whereas using the four suction cups will allow the filter to be positioned below water level. To use the four suction cups, insert the suction cups into the four oval openings on the back side of the filter housing. Use a twisting motion while inserting until they are fully seated. To use the hanging bracket, install two suction cups on either back side of the filter housing. Turn the bracket sideways and insert the molded pin into the remaining upper oval opening of the filter housing. Rotate the bracket until it’s vertical. Push the bottom pininto the lower oval opening. Insert one of the suction cups into the key-hole opening in the hanging bracket as shown. Now the filter can be positioned to keep the filter near the water surface by positioning the two horizontal upper bracket walls above and below the aquarium frame.3. Air tube: If aeration is desired, it will be necessary to install the air hose. To do this it will be necessary to remove the front grill.4. Adjustable aeration venturi allows for aeration flow control. Install air tube: With front grill removed, connect the air hose to the nozzle on the impeller cover, then feed it through the top opening in the divider wall, then through the top opening in the filter housing. Attach valve, connector, tubing clip and a muffler as shown. Tubing clip can be used to create a loop.5. Open mesh bag with ceramic filter media and remove media. Place individual pieces into filter chamber opening on right side.6. Replace the front grill by reversing the process used to remove it. Insert the top cap into the opening at the top of the filter.7. Insert the barbed end of the Drain Tube into the Drain hose. This will be used for the water-change drain feature.8. The power cord from the motor can be pressed into the retainer on the back of the filter to position the cord in the corner of the aquarium.9. Install the filter by pressing the filter into a rear corner of your aquarium. If the Hanging Bracket is used, position it to capture the top frame of your aquarium between the two arms of the bracket. Position the power cord creating a drip loop between the aquarium and the receptacle. in tubing after installation in aquarium. This will keep valve above water level.

Safety

  • Caution: Close supervision is necessary when any appliance is used by or near children
  • Safety Warnings: To guard against injury, basic safety precautions should be observed, including the following: Danger - To avoid possible electric shock, special care should be taken in the usage of aquarium equipment. For each of the following Situations, do not attempt repairs yourself; return the appliance to an authorized service facility for service or discard the appliance. 1. A. If the appliance shows any sign of abnormal water leakage, immediately unplug from the power source. B. Do not operate any appliance if it has a damaged cord or plug, or if it is dropped or damaged in any manner. C. To avoid the possibility of the appliance plug or receptacle getting wet, position aquarium stand and tank to one side of a wall mounted receptacle to prevent water from dripping onto the receptacle or plug. A drip loop, shown in the Figure at right should bearranged by the user for each cord connecting an aquarium appliance to a receptacle. The drip loop is that part of the cord below the level of the receptacle or the connector if an extension cord is used, to prevent water traveling along the cord. If the plug or receptacle does get wet, DON'T unplug the cord. Disconnect the fuse or circuit breaker that supplies power to the appliance. Then unplug and examine for presence of water in the receptacle.2. Close supervision is necessary when any appliance is used by or near children.3. To avoid injury, do not contact moving parts or hot parts such as heaters, reflectors, lamp bulbs, etc. 4. Always unplug an appliance from an outlet when not in use, before putting on or taking off parts, and before cleaning. Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect.5. Do not use an appliance for other than intended use. The use of attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition.6. Do not install or store the appliance where it will be exposed to the weather or to temperatures below freezing.7. Make sure an appliance mounted on a tank is securely installed before operating it.8. Read and observe all the important notices on the appliance.9. lf an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.

Specifications

  • Benefits: 1. Provides water filtration mechanically removing debris2. Promotes growth of helpful bacteria
  • Compatible Tank size: 30 Gallons
  • Filter Types: Biological; Mechanical; Chemical; Carbon