• Blue, 1ea
  • Blue, 1ea
1 2

RADIO SYSTEMS CORPORATION

Drinkwell Pagoda Ceramic Pet Fountain

SKU: PT0137014898

Blue, 1ea

$80.50 USD
$64.00 USD $80.50 USD
Sale Sold out

The Drinkwell Ceramic Pagoda Fountain continuously circulates and filters your pet's water, keeping it cleaner and fresher than a normal water bowl. The Pagoda Fountain offers 70 ounces of fresh, filtered water and the porcelain design is easy to clean and looks great in the home. The dual patented free-falling streams aerate the water for freshness and encourage pets to drink more water, providing the best hydration solution for your pet!

Dimension

  • Dishwasher Safe: Yes
  • Product Gross Weight: 6.6700 lb
  • Product Net Weight: 6.6700 lb
  • Product Height: 8.38 in
  • Product Length: 10.63 in
  • Product Width: 12.38 in
  • Capacity: 70 oz
  • Environment: Indoor

Instruction

  • Assembly Required?: Yes
  • Use Instructions: Do not run dry - for indoor use only.1. Carefully remove all the fountain components from the packaging and set aside prior to assembly.2. As with any electrical device, check the electrical cord for any tears or damage before use.3. Place the foam filter around the pump by inserting the pump into the filter from the top, make sure the cord rests on top of the filter.4. Take the bowl and place the pump inside the rectangular indention. Make sure the circular opening on top of the pump is positioned in the bottom left corner. The foam filter will be slightly compressed between the pump and the post. Press down on the pump to engage the suction cups. Once the pump is securely in place, feed the cord over and through the raised post and out the notch on the bottom side of the bowl.5. Remove the extra slack from the cord and insert the rubber cap into the raised post. Make sure the cutout channel is aligned with the cord, then insert your finger and push all the way down. Fold the top of the cap over the post to seal off the bowl .6. Rinse the charcoal filter thoroughly in cold water to help remove any excess and loose charcoal dust. Once the filter is rinsed off, place inside the filter housing case with the larger side facing down. The filter will only fit inside the case one way, if it does not fit, flip it over. Attach the lid to the filter housing case, press down until you hear it snap in place.7. Attach the filter housing case to the pump by inserting the raised notch into the circular opening on top of the pump. The opening on top of the filter housing should be right next to the sealed raised post.8. Align the tower with the rectangular indentation inside the bowl and carefully lower it until it rests flat. The rubber grommet will create a seal between the filter housing case and the tower.9. Place the fountain in a desired location. If placing on carpet, tile or wood flooring, use a protective mat or other durable, water resistant surface. This will help protect your floor from any splashing or spills caused by your pet.10. Fill the fountain by pouring water directly into the bowl. Leave at least a half inch (1.27 cm. of space between the water level and the rim of the bowl to help control spills and splashing.11. Make sure the cord, the adaptor and your hands are completely dry before you plug the fountain in. Connect the inline plug and make sure no silver is showing, then plug the adaptor into an electrical outlet.12. Add water to the fountain as needed. Never let the water level fall below 1” (2.54 cm. in height or you may risk burning out the pump.
  • Care and Cleaning Instructions: Fountain: Clean once a week.The fountain must be cleaned on a regular basis to continue working normally.1) Unplug the fountain and disconnect the inline plug.2) Carefully lift the tower and allow the water to slowly pour back into the bowl. Once all the water has been emptied into the lower bowl, set the tower aside for cleaning.3) Take the tower and turn upside down to remove the rubber grommet. Grab the grommet from inside and pull straight down, set aside for cleaning.4) Remove the filter housing case from the pump by lifting straight up. Open the case and remove the filter from inside. Set the filter housing aside for cleaning.5) Remove the rubber cap affixed to the raised post by inserting a finger under the lip and pull straight up to remove.6) While securely holding the cord and the bottom of the bowl with both hands, dump out the remaining water inside the bowl into a sink.7) With the inline plug disconnected and water removed, grab the pump and lift straight up to disengage the suction cups. Continue pulling the pump’s cord up and out through the raised post in the center of the bowl. Once the pump is completely removed from the bowl, separate the foam filter and set aside for proper cleaning.8) Once the fountain is completely disassembled, you will have: the ceramic bowl and tower, two rubber pieces, the filter housing case, a charcoal filter, foam filter and the pump.9) Clean the fountain parts with soap and warm water. You can also place the fountain in the dishwasher, but we strongly recommend hand washing the ceramic fountains. Never place the pump in the dishwasher.Pump Maintenance:Cleaning the pump is essential to the longevity of the fountain as well as the cleanliness of the water. Clean the pump every 2 weeks.1) Remove the pump from the fountain.2) Remove the faceplate by using your thumb and forefinger to gently squeeze on both sides of the plate and pull off. It may be necessary to insert a fingernail or other slim object into the seam of the faceplate to pry it off.3) Next, remove the stator by placing your fingernail underneath the small lip located on the narrow side of teardrop-shaped stator and pull out to remove.4) Once the stator is removed, remove the impeller (3 bladed propeller). The impeller is held in place by a magnet, simply insert a fingernail or other slim object underneath the plastic blade and lift out.5) Once the pump is completely disassembled, you can clean the parts with soap and warm water. Use a cotton swab or bottle brush to get inside the pump’s cavity and remove any build up. For added disinfecting and/or hard water removal, clean the pump with white vinegar.6) Once the parts are clean and well rinsed, you can reassemble the pump for use. a) Replace the impeller b) Replace the stator c) Replace the intake plate

Safety

  • Safety Listing: UL-Listed
  • Safety Warnings: When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following:1. Read all the instructions before using the appliance.2. To reduce the risk of injury, close supervision is necessary when an appliance is used near children. 3. To protect against electric shock, do not place cord or plug in water or other liquids.4. Only use attachments recommended or sold by the manufacturer.5. Do not use outdoors. For indoor household use only.6. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.7. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been dropped or damaged in any manner. Call customer service immediately for further instructions.8. For a portable appliance - To reduce the risk of electrical shock, do not place or store an appliance where it can fall or be pulled into a tub or sink.9. Always unplug any appliance when not in use, before putting on or taking off parts and before cleaning. Never pull on the cord to remove the adaptor from the wall outlet.10. Do not use an appliance for anything other than its intended use.

Specifications

  • Cord Length: 66 Inches
  • Filter Types: Charcoal
  • Voltage: 12 Volts
  • Wattage: 3 Watts