Skip to product information
1 of 4

SPECTRUM BRANDS PET LLC

Marineland Emperor 400 Power Filter

SKU: PT0145050479

Black, 1ea/400 GPH

Regular price $96.34 USD
Regular price $93.50 USD Sale price $96.34 USD
Sale Sold out

Emperor Filter Systems are advanced aquarium technology at its finest. With a revolutionary two-pump design, flow and filtration efficiencies of the Emperor's are unmatched by other filters in their class. Featuring as much as twice the filter cartridge capacity, additional chemical filtration capability, and extra large, spray bar-driven Bio-Wheel wet/dry biological filtration, Emperor Filter systems offer the aquarist a filtration system that can stand up to any aquarium they can dream of. This unit is for aquariums from 50 to 80gallons and uses Rite-Size inEin fliter cartridges.

Dimension

  • Product Gross Weight: 4.6000 lb
  • Product Net Weight: 4.6000 lb
  • Product Height: 10.50 in
  • Product Length: 17.00 in
  • Product Width: 7.00 in

Instruction

  • Use Instructions: Install Filter Cartridge(s) and Media Container:1. Rinse Filter Cartridge thoroughly and install (blue side toward back of Filter Box)2. Open and fill one side of Media Container. Close and rinse thoroughly. 3. BIO-Wheel(s) should rest securely in BIO-Wheel BearingsAssemble Intake:1. Attach Strainer to Extension Tube2. Attach Extension Tube to Mid-Level Intake Strainer3. Attach Mid-Level Intake Strainer to bottom end of Intake Tube4. Insert Intake Tube into Flow Manifold HousingInstall and Fill:1. Before adding water, install assembled Emperor on back of aquarium frame2. Fill Filter Box with aquarium water until it spills into aquarium3. Replace Filter Cover

Safety

  • Caution: Close supervision is necessary when any appliance is used by or near children
  • Safety Warnings: 1. A. If the appliance falls into the water, DON’T reach for it. First unplug it and then retrieve it. If electrical components of the appliance get wet, unplug the appliance immediately.B. If the appliance shows any sign of abnormal water leakage, immediately unplug from the power sourceC. Carefully examine the appliance after installation. It should not be plugged in if there is water on parts not intended to be wet.D. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or if it is dropped or damaged in any mannerE. To avoid the possibility of the appliance plug or receptacle getting wet, position aquarium stand and tank to one side of a wall mounted receptacle to prevent water from dripping onto the receptacle or plug. A “drip loop” should be arranged by the user for each cord connecting an aquarium appliance to a receptacle. The “drip loop” is that part of the cord below the level of the receptacle or the connector, if an extension cord is used, to prevent water from traveling along the cord and coming in contact with the receptacle. If the plug or receptacle does get wet, don't unplug the cord. Disconnect the fuse or circuit breaker that supplies power to the appliance. Then unplug and examine for presence of water in the receptacle.2. To avoid injury, do not contact moving parts or hot parts such as heaters, reflectors, lamp bulbs, etc.3. Always unplug an appliance from an outlet when not in use, before putting on or taking off parts, and before cleaning. Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect.4. Do not use an appliance for other than intended use. The use of attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition.5. Do not install or store the appliance where it will be exposed to the weather or to temperatures below freezing6. Make sure an appliance mounted on a tank is securely installed before operating it7. Read and observe all the important notices on the appliance8. If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.9. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat this safety feature.

Specifications

  • Benefits: 1. The BIO-Wheel delivers superior wet/dry biological filtration for nitrifying bacterial growth, eliminating toxic ammonia and nitrite2. Marineland Rite-Size Filter Cartridges provide mechanical and chemical filtration, screening out dirt and debris and removing odors, discoloration and impurities3. Multi-stage filtration for a clean healthy aquatic environment
  • Compatible Tank size: 80 Gallons
  • Filter Types: Biological; Chemical; Mechanical
  • GPH: 400 Gallons