Skip to product information
1 of 1

DOSKOCIL MFG CO INC

Petmate Fresh Flow Rain Pet Fountain 75oz

SKU: PT0121544069

White, 1ea/One Size

Regular price $75.07 USD
Regular price $59.66 USD Sale price $75.07 USD
Sale Sold out

Enrich your pet's environment with the first ever, 100% battery powered, electronic Petmate® Fresh Flow® Rain Fountain. When the pump begins to run, water is drawn from the bowl up through the tube and filter to the top of the lid, creating secondary drinking locations. Once water reaches the top, it rains down the inside of the water chamber. As the water fills the water chamber, the water streams from the front nozzle and refills the bowl creating a rain like flow that is naturally appealing to cats and dogs and will perk your pet's interest. The water reservoir and pump are self-balancing allowing gravity to constantly flow water, allowing the pump to run half of the time. No more cords, outlets, or limitations on where to place your pet's water fountain. Modern design fits well with any home decor. Keep your pet hydrated and happy with the easy-to-clean Petmate Fresh Flow Rain Fountain. Requires four D-Cell batteries (batteries not included).

Dimension

  • Product Gross Weight: 2.0000 lb
  • Product Net Weight: 2.0000 lb
  • Product Height: 9.20 in
  • Product Length: 12.94 in
  • Product Width: 10.00 in
  • Capacity: 75 oz
  • Environment: Indoor

Instruction

  • Assembly Required?: Yes
  • Use Instructions: 1. Open the battery compartment by unscrewing the Phillips head screw of the compartment door Install four (4) D batteries in the base. Make sure that the negative end (-) of each battery touches the spring.2. Close the battery compartment door and secure it with the screw. The pump cable remains outside the battery compartment.3. Connect the pump to the base of the device.4. Place the pump in the bowl and press firmly so that the suction cups can bond. Adjust the flow rate on the (+) of the sliding lever.5. Place pump wire through wire guide.6. Install water tube onto pump. Be sure tube is seated completely on pump nozzle.7. Rinse filter in water to remove excess charcoal duct. Place filter into bowl.8. Feed water tube into base and through the base unit assembly.9 (A). Place the water tank on the base. so that it snaps into place.(B). Open the docket and press it down firmly.10. Fill the shot set with water up to about 6 cm below the rim. Do not fill water in the water tank.Warning: If the water container is filled with water, the bowl may overflow.11. Use the on/off switch on the back of the device to shade the device.

Safety

  • Safety Warnings: 1. Similar to any water dish or bowl, do not place bowl on a floor or surface that could be damaged by water.2. Do not fill the water bowl white the water is streaming. as this will cause the unit to overflow. Only fill the water bowl while the water is not moving.When using electric appliances, basic precaution should always be followed including the following:1. This is not a chills toy. To reduce risk of injury, close supervision is necessary when as appliance is used near children.2. Do not make contact with moving parts.3. Only use attachments recommended or sold by the manufacturer.4. Do not use outdoors.5. For household use only.7. To reduce risk of electrical shock, do not put entire unit in water to other liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink.

Specifications

  • Filter Types: Charcoal
  • Reservoir Included: Yes