• Forest, 1ea/MD
  • Forest, 1ea/MD
1 2

RADIO SYSTEMS CORPORATION

PetSafe Current Pet Fountain

SKU: PT0137015683

Forest, 1ea/MD

$0.50 USD
$0.00 USD $0.50 USD
Sale Sold out

Add color to your home while encouraging your pet to drink more water with the new PetSafe Current Pet Fountain. The Current is an affordable way to provide your pet with a constant source of fresh, filtered water. The submersible pump constantly circulates the water through the bowl, keeping the water aerated with oxygen and appealing to pets. The BPA-free plastic fountain comes apart for easy cleaning and is dishwasher safe. The Current comes in an Orchid color and is available in 3 different sizes.

Dimension

  • Dishwasher Safe: Top Rack Only
  • Product Gross Weight: 2.1000 lb
  • Product Net Weight: 2.1000 lb
  • Product Height: 3.88 in
  • Product Length: 10.75 in
  • Product Width: 10.69 in
  • Capacity: 80 oz
  • Environment: Indoor

Instruction

  • Assembly Required?: Yes
  • Assembly Instructions: 1.Attach the pump plate to the knob on the pump. Make sure the placement tab is on the top of the pump, and press down to secure it in place. If the pump placement tab is facing towards the outside of the bowl. You have it backwards and need to turn it around.2. With the pump plate properly attached, slide the pump into place by placing the pump plate between the two slots inside the bowl. Press down to secure in place.3. With the pump in place, the cord on the pump should be facing the top of the fountain. Make sure the in-line plug is disconnected from the adapter; feed the cord through the small opening in the center of the bowl.4. Next, feed the cord through the bottom of the bowl until there is no slack left in the cord. Press the cord into the cord channel and feed through the cord notch. 5. Replace the carbon filter. Rinse the filter thoroughly under cold water before placing in the fountain. This will remove any loose carbon dust, which is harmless. A small amount of carbon dust may shed for the life of the filter. This is normal and not harmful to your pet.6. Insert the carbon filter. The filter will fit between the two triangular slots to the right of the pump. Make sure it is pushed all the way down and that the black side of the carbon filter is facing toward the pump. 7. Place the fountain in a desired location. To protect your floor always use a protective mat, such as a towel or water resistant placemat. This will help protect your floor from splashing or spills caused by your pet.8. Fill the fountain by pouring water directly into the bowl, this will prime the pump. Leave at least 1/4 inch of space between the water level and the rim of the bowl.9. Attach the lid, press down until you hear it snap in place.10. Before you plug in the fountain, make sure the electrical power cord, the adapter and your hands are dry. Connect the in-line plug and make sure no silver is showing, then plug the adapter into a standard electrical wall outlet.11. Add water to the bowl as needed. Never let the water level fall below 2 inches from the base of the bowl or you might risk pump failure.
  • Use Instructions: Rinse all fountain parts, including the pump, with warm water before operating the pet fountain. This will remove any dust or residue that remain in the system from the manufacturing process. Refer to the “Pump Maintenance” section of this Operating Guide for detailed instructions on how to properly clean your pump.1. As with any electrical appliance, check the electrical power cord for any tears or damage before use.2. Remove the lid by placing a finger underneath the tab on the back of the lid and lift up.3. Rinse the carbon filter thoroughly under cold water before placing in the fountain. This will remove any loose carbon dust, which is harmless. A small amount of carbon dust may shed for the life of the filter. This is normal and not harmful to your pet.4. Insert the carbon filter. The filter will fit between the two triangular slots to the right of the pump. Make sure it is pushed all the way down and that the black side of the carbon filter is facing toward the pump.5. Place the fountain in a desired location. To protect your floor always use a protective mat, such as a towel or water resistant placemat. This will help protect your floor from splashing or spills caused by your pet.6. Fill the fountain by pouring water directly into the bowl, this will prime the pump. Leave at least 1/4 inch of space between the water level and the rim of the bowl.7. Attach the lid, press down until you hear it snap in place.8. Before you plug in the fountain, make sure the electrical power cord, the adapter and your hands are dry. Connect the in-line plug and make sure no silver is showing, then plug the adapter into a standard electrical wall outlet.9. Add water to the bowl as needed. Never let the water level fall below 2 inches from the base of the bowl or you might risk pump failure.
  • Care and Cleaning Instructions: Fountain must be cleaned to continue working normally. Never wash the filters with soapy water, as the soap residue will seep into the filters and cannotbe removed. Only rinse the filters with water.Carbon Filter: Replace carbon filter every two to four weeks.• Always rinse the carbon filter prior to use.• A small amount of carbon dust may be released for the life of the filter, this is normal and is not harmful to your pet. • Replace filters more frequently when using the fountain for multiple pets or pets that produce a lot of saliva.PET FOUNTAIN: Clean the fountain once a week.Unplug the fountain and disconnect the in-line plug.2. Remove the lid by placing a finger underneath the tab on the back of the lid and lift up.3. Remove the carbon filter from the bowl and dispose.4. Empty the water out of the fountain.5. Flip the bowl over and remove the cord from the cord notch and channel. It should now be loose for easy removal.6. Grab the pump and lift straight up, this will remove the pump and the pump plate.7. Next, pull the pump cord up through the opening until the pump is completely removed from the bowl piece.8. Remove the pump plate by simply pulling it away from the pump.9. Once the fountain is completely disassembled, you will have three plastic parts: the lid, the bowl and the pump plate.10. Hand wash the fountain plastic parts with warm water and soap. This fountain may also be cleaned with a diluted vinegar solution (20% vinegar, 80% water).Important: Be sure to rinse thoroughly with fresh water. You can also put the fountain in the top rack of the dishwasher. Remove the pump before placing the pet fountain in the dishwasher. DO NOT PLACE PUMP IN DISHWASHER! If possible, it is recommended that you turn down the heat of the water inside the dishwasher.11. If you have trouble reaching certain spots or hard-to-reach corners, try using a cotton swab or purchase the Drinkwell® Cleaning Kit, a 3-Piece Brush kit.

Safety

  • Safety Warnings: When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following:1. To reduce the risk of injury, close supervision is necessary when an appliance is used by or near children. 2. To protect against electric shock, do not place electrical power cord or plug in water or other liquids.3. Do not use outdoors. Do not run dry. For indoor household use only. 4. Do not pull on the electrical power cord to remove the plug from the electrical outlet.5. To unplug, grasp the plug, not the electrical power cord.6. Do not operate any appliance if it has a damaged electrical power cord or plug, or if it is malfunctioning or has been damaged. Call Customer Care Center immediately for further instructions.7. For a portable appliance - To reduce the risk of electric shock, do not place or store an appliance where it can fall or be pulled into a bath tub or sink.8. Always unplug any appliance when not in use, before putting on or taking off parts and before cleaning.9. Do not use an appliance for anything other than its intended use.10. If the plug of this device gets wet, turn off the electricity to that electrical outlet. Do not attempt to unplug.11. Examine this appliance after installation. Do not plug into electrical outlet if there is water on the electrical power cord or plug.12. Always unplug any appliance when not in use, before putting on or taking off parts, and before cleaning. Never pull on the electrical power cord to remove the plug from the wall outlet. 13. Do not allow pets to chew on or swallow any parts. If you are concerned about the power cord, purchase a cord conduit (a hard plastic protector) at any hardware store.14. The plastic fountain parts are BPA-FREE. However, some animals have been known to be sensitive to plastic food and water containers. If your animal shows signs of an allergic reaction to the plastic, please discontinue use until you have consulted with your veterinarian.

Specifications

  • Cord Length: 66 Inches
  • Filter Types: Carbon
  • Voltage: 12 Volts
  • Wattage: 2 Watts