Prevue Pet Products Chicken Coop with Herb Planter
SKU: PT01600047011ea/47 5/8 in
Prevue Pet Products Chicken Coop with Herb Planter 4701 provides your hens with plenty of room to roam. A large coop area sits atop the protected chicken run letting your flock access the grass, ground and outdoors. The ventilated roosting area provides air circulation plus light and includes two roosting bars, two nesting areas separated by a divider and an under-coop removable, galvanized tray for easy clean-up and rust prevention. Crafted from a fine weather-resistant variety of fir tree lumber and coated with a protective, pet-safe, stain with green asphalt coated roof panels to protect your chickens from inclement weather. Both large front coop doors and the chicken run access door feature bolt locks and ½'' galvanized wire mesh to guard against predators. Spacious enough for 3 - 4 hens, this chicken coop features an integrated planter bay for your herb garden, flowers or potted plants. All Prevue chicken coops undergo independent lab testing to conform to the highest levels of pet safety. Our Chicken Coop with Herb Planter 4701 measures 47 5/8'' long, 27 ½'' wide and 47 5/8'' high with ½'' wire spacing. Herb Planter measures 25 5/8'' long, 10'' wide and 5 ½'' high. To maintain the longevity of your purchase, we recommend that you periodically treat it with a non-toxic sealant and protect the coop with a tarp or other covering during extended periods of inclement weather.
Dimension
Dimension
- Product Gross Weight: 71.0000 lb
- Product Net Weight: 71.0000 lb
- Product Height: 26.75 in
- Product Length: 40.50 in
- Product Width: 9.75 in
- Capacity: 3 - 4 Hens
Instruction
Instruction
- Assembly Instructions: Assemble the coop house. You will need these pieces:1. Align the right side coop house panel flush along the top edge with the front & back panels2. Attach the back panel to the right panel with screws, using the pre-drilled holes as guides3. Attach the remaining panels, also with screws4. Attach the back panel to the right panel with screws, using the pre-drilled holes as guides. Attach the remaining panels, also with screws. Set the floor in place.5. Attach the back panel to the right panel with screws, using the pre-drilled holes as guides. Attach the remaining panels, also with screws6. Set the coop house on the left end of the chicken run. Locate the pre-drilled holes on the underside of the frame rails. Attach the chicken run to the coop house with screws up through the pre-drilled holes.7. Set the herb planter box on the right end of the chicken run. Locate the pre-drilled holes on the underside of the frame rails. Attach with screws.8. Leave about a ¾ gap from the end of the bar to the ramp. Attach the ramp to the support bar with screws.9. Center the front and back roof panels over the coop house.Catch the blocks (on the underside of the roof) onto the top of the coop house frame. Tip the panels together and align them with your hands so they are flush at the peak and also side-to-side.10. Tip the left side and right side roof panels into place11. Lay the roof trim pieces in position. Using the pre-drilled holes, attach the trim with screws.12. Lay the roof cap in position over the peak and attach with screws13. Using the pre-drilled holes, attach the entire roof unit to the coop house frame with screws14. Your coop is now fully assembled and ready for use
Specifications
Specifications
- Enclosed Run: Yes
- Number of Doors: 3 Count