• Black Hammertone Finish, 1ea
1 1

PREVUE PET PRODUCTS INC

Prevue Pet Products Hampton Deluxe Divided Breeder Bird Cage

SKU: PT0160000075

Black Hammertone Finish, 1ea

$278.57 USD
$222.46 USD $278.57 USD
Sale Sold out

Prevue Pet Products Hampton Deluxe Divided Breeder Cage F075 in Black Hammer tone offers quality wrought iron construction with convenient features built-in. Use the included divider to create two separate, smaller cages or remove divider to use as one large cage. Each cage system contains two front doors with secure locks, side nesting doors and pull out trays and grilles complete with wind bell lock. Ideal for multiples of small birds such as canaries, Finches and parakeets, our Hampton Divided Breeder Cage measures 37 ½ Long, 18 Wide and 20 ½ High with ½ wire spacing. Four perches and four plastic cups are also included. Spacious enough for use as an independent unit, you can also stack multiple (up to three) Hampton Deluxe Divided Breeder Cages or combine your F075 with our Hampton Deluxe Divided Breeder Cage System with Stand F070. Both cages are available exclusively in an elegant Black Hammer tone powder coat finish.

Dimension

  • Product Gross Weight: 31.0000 lb
  • Product Net Weight: 31.0000 lb
  • Product Height: 20.50 in
  • Product Length: 37.50 in
  • Product Width: 18.00 in

Instruction

  • Assembly Instructions: 1. To assemble the CAGE BODY:Turn the front panel and right side panel (with grille/tray channels facing the cage interior) upside down. Guide the extended wires on the side panel into the holes on the frame of the front panel. Secure the panels together with a hex screw in each corner. Add the back panel and left side panel in the same method, securing all panels together with a hex screw in each corner.2. To assemble the CAGE BODY:With the cage body still upside down, install the two tray channel rails. Orient the channels as shown in the detail. Secure the channels with hex screws. Install one of the three square rails. Secure the rail with hex screws. Install the two remaining square rails. Secure the rails with hex screws.3.To add the ACCESSORIES:Insert the slotted ends of the perches on a vertical wire and resting on a horizontal wire or frame rail. Slide the cup doors up and insert the food/water cups. The closed door holds the cup in place. Rotate the grille/tray lock out of the way and slide the grill into the top channels and the tray into the bottom channels for each cage side. Leave the center divider grille out for full-cage use, or slip it in place to divide the cage interior into two separate spaces.4. To add the ROOF and endcaps:Set the roof panel into place. Back the corner screw out and slip a corner bracket over the corner as shown in the detail. Tighten the screw to secure the bracket on the corner. Repeat the method for all corners to fully secure the roof in place. Tap the endcaps into each corner— top and bottom—to finish off the assembly.

Safety

  • Safety Warnings: Inspect the product periodically and remove from use if it becomes worn or damaged

Specifications

  • Bird Cage Access Doors: 4 Count