• Blue, 1ea
  • Blue, 1ea
  • Blue, 1ea
  • Blue, 1ea
  • Blue, 1ea
  • Blue, 1ea
  • Blue, 1ea
  • Blue, 1ea
  • Blue, 1ea
  • Blue, 1ea
1 10

PREVUE PET PRODUCTS INC

Prevue Pet Products Hamster Playhouse

SKU: PT0160002006

Blue, 1ea

$98.66 USD
$78.52 USD $98.66 USD
Sale Sold out

Prevue Pet Products Hamster Playhouse 2006 is a palatial four-level home for your hamsters or gerbils. Quad-level cage provides plenty of options for healthy activity while also satisfying your pet’s natural instincts to explore, hide and play above ground level. Multi-color components include two tunnel passageways, one on each side of the cage, two exercise wheels, a cozy hideaway, three non-slip ramps and three textured, non-slip, movable platforms. Featuring two access points, this vibrantly colored hamster and gerbil cage has one front door plus one top-opening door.

Dimension

  • Bar/Wire/Mesh Spacing: 3/8 Wire Spacing
  • Product Gross Weight: 9.5000 lb
  • Product Net Weight: 9.5000 lb
  • Product Height: 27.50 in
  • Product Length: 18.38 in
  • Product Width: 11.75 in

Instruction

  • Assembly Instructions: Pre-assemble the House: Flip the sides up. Push the tabs into the slots until they click. Align the pegs on the underside of the roof into the slots on the side walls until they click. Pre-assemble the two Exercise Wheels: Snap the covers onto the wheel bases. Pre-assemble the Tunnel Trails: Both types of tunnel half-pieces have pegs on one end and receiving holes on the other. Align pegs with holes and click together. Add the ring on one end to hold pieces together. Make the following shape combinations. Take note that some ends do not finish with rings. They will be used in the assembly in this order. Open the lower mesh (sides are equal in height to the front & back panels) to a rectangle. Set the mesh into the base, inserting the panels between the rim and the raised tabs. Clip the mesh to the base on both sides of the cage. Insert the bar on the back of the wheel through, the cage wires. Rotate the bar 90° tosecure the wheel to the mesh. Firmly but gently wiggle the ring on the three-curve tunnel trail into the opening of the holder on the side panel. Install a platform with the ramp notch in the front, catching all tabs on a horizontal wire at an even height. Add the ramp to the platform. Insert the second platform and ramp. Install the second wheel. Insert a single-curve tunnel trail into the holder. Start at one end first. Weave the upper mesh side panel onto thealternating-direction loops. Finish at the other end using the same method. Along the front and back, bend the tab down over both horizontal wires. Install the final platform. Add the ramp. Insert the remaining tunnel trails. Remove the wing nut. Place the house on a platform and poke the screw post through the wires. Replace the wing nut from the cage exterior to secure the house in place. Center the roof on the cage. At one end, weave the outer roof wire onto thealternating-direction loops on the side panel. Softly bend the roof mesh to catch the roof line onto the front and back panel loops. Finish by weaving the roof onto the alternating direction loops on the opposite end.

Specifications

  • Enclosure Type: Front; Top
  • Number of Stories: 4 Count