• Black/Yellow, Black/Blue, 2ea/2 pk
  • Black/Yellow, Black/Blue, 2ea/2 pk
  • Black/Yellow, Black/Blue, 2ea/2 pk
1 3

PREVUE PET PRODUCTS INC

Prevue Pet Products Pre-Packed Beijing Parakeet or Cockatiel Bird Cage

SKU: PT0160041730

Black/Yellow, Black/Blue, 2ea/2 pk

$94.19 USD
$74.95 USD $94.19 USD
Sale Sold out

Prevue Pet Products 41730 Beijing bird cage features a roomy double roof design.Two large front opening doors plus a removable bottom grille and 1 deep pull-out tray allow for convenient cleaning. Our Beijing bird cage includes two outside access feed/water cups, two perches and is designed for parakeets, cockatiels and other small-medium birds. Cage measures 16 Long, 14Wide, 32 High with 3/8 wire spacing. This item is sold as a two-pack assorted carton.

Dimension

  • Product Gross Weight: 9.9000 lb
  • Product Net Weight: 9.9000 lb
  • Product Height: 29.30 in
  • Product Length: 4.40 in
  • Product Width: 28.80 in

Instruction

  • Assembly Instructions: 1. Assemble the base:a. The base (B) should arrive with the tray (T) in positionb. Place the grille (G) into the base2. Assemble the body of the cage:a. Unflatten the cage(C) body, opening the one-piece mesh until it forms a rectangleb. Set the cage body into the base. Catch the cage wire loops (along the bottom edge) into the slots on the cage base. There are two along the front and two along the back—one example.3. Install the accessories:a. Assemble the two-piece cups. The opening in the hooded top faces the perch. Snap the top into the base. (Cups can be disassembled for cleaning.)b. Lift up the sliding door on the cage with the cup’s perch/opening facing the inside of the cage, and set the cup into placec. The upper perch(1) should be installed from front to back, just under the upper floor landing style doord. The lower perch(2) may be installed from side to side, aligned on the lower horizontal wire4. Assemble the lower roof:a. Center the lower roof (R1) panel on the cage body and lower it down over the central cage coreb. Hook the wires running vertically on the lower roof onto the wire loops along the front edge of the cage body. Hook both front loops first, then the back. (Two loops in the front; two along the back.)5. Assemble the roof top:Hook the wires running vertically on the roof top(R2) (where the roof flares out horizontally) onto the wire loops along the side edges of the cage. Hook the loops on one side first, then the hook the other side. (Two loops along the left; two along the right.)

Safety

  • Safety Warnings: Inspect the product periodically and remove from use if it becomes worn or damaged

Specifications

  • Bird Cage Access Doors: 4 Count