Skip to product information
1 of 1

SEACHEM LABORATORIES INC

Seachem Laboratories Reef Builder Biological Enhancer

SKU: PT0167103660

1ea/10.6 oz

Regular price $7.63 USD
Regular price $6.96 USD Sale price $7.63 USD
Sale Sold out

Reef Builder raises carbonate alkalinity without immediately impacting on pH. With long term use there will be a tendency to stabilize at pH 8.3. Carbonates and calcium are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. To prevent this you must provide carbonates (Reef Builder) and calcium (Reef Advantage Calcium or Reef Complete). Used as directed, Reef Builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity. Reef Builder and Reef Buffer may be used together. Use Reef Builder to raise carbonate alkalinity without affecting pH. Use Reef Buffer to raise carbonate alkalinity and pH. Reef alkalinity should be maintained at 3-5 meq/L (8-14 dKH). Alkalinity should not be allowed to fall below 2 meq/L. DO NOT OVERDOSE: Excess alkalinity may enhance the loss of calcium, magnesium, and strontium. Do not directly mix with any calcium, magnesium, or strontium supplement. Best if calcium & carbonate additives are added on alternate days or at least 30 minutes apart. Contains carbonate, bicarbonate, chloride, and sulfate salts of sodium, magnesium, calcium, strontium, and potassium. Each gram contains a minimum of 12 meq of alkalinity.

Dimension

  • Product Gross Weight: 0.8600 lb
  • Product Net Weight: 0.8600 lb
  • Product Height: 4.81 in
  • Product Length: 2.44 in
  • Product Width: 2.44 in

Instruction

  • Use Instructions: Beginner: Use 3 g (1/2 level teaspoon) per 150 L (40 US gallons) twice a week. Dissolve in at least 250 ml (1 cup) of freshwater. Check alkalinity every 2 weeks and adjust amount or frequency accordingly. For precise dosing, use the Seachem Digital Spoon Scale.Advanced: Check alkalinity (use MultiTest Marine pH & Alkalinity to test alkalinity levels), then follow addition regimen above until alkalinity is adjusted to 3-6 meq/L (8-17 dKH). Each 3 g/150 L will raise alkalinity by about 0.25 meq/L. Quantity or frequency can be adjusted, but do not exceed 12 g/150 L per day. Thereafter, use as required to maintain alkalinity.Expert: After determining the alkalinity consumption rate, set up a continuous drip system. Use the following formula (or skip the math and use our Dosage Calculator) to determine how much to add to your top–off water: m=0.08 va (m=grams to add to top off water, v=volume of tank in liters, a=amount to raise alkalinity in meq/L). For example, if you want to raise your alkalinity by 1 meq/L in a 200 liter tank, then you would add 0.08 x 200 x 1=16 g into the top–off water. [For reference: 1 gallon=3.8 liters, 6 g=1 teaspoon].Do not overdose: Excess alkalinity may enhance the loss of calcium, magnesium, and strontium. Do not directly mix with any calcium, magnesium, or strontium supplement. Best if calcium & carbonate additives are added on alternate days or at least 30 minutes apart.

Safety

  • Caution: Aquarium use only. Keep away from children.

Specifications

  • Benefits: 1. Raises carbonate alkalinity (KH) with minimal impact on pH.2. The blend of carbonate sources that will not lower pH as competing bicarbonate only products can.3. Will not deplete calcium, magnesium, or strontium.
  • pH Balance: 8.3 pH pH