Seachem Laboratories Tidal 75 Power Filter
SKU: PT0167106501Black, 1ea/350 GPH
Regular price
$71.58 USD
Regular price
$69.34 USD
Sale price
$71.58 USD
Unit price
per
With a host of features including a self-priming pump, dual water intake, adjustable flow, maintenance monitor, and a filter basket that holds any kind of filtration media - and more of it - Tidal Power Filters are designed to deliver the highest water quality possible with maximum versatility and ease of use.
Dimension
Dimension
- Product Gross Weight: 3.0000 lb
- Product Net Weight: 3.0000 lb
- Product Height: 6.80 in
- Product Length: 9.10 in
- Product Width: 9.80 in
Instruction
Instruction
- Use Instructions: Assembly and start up:1. Insert bottom half of the telescoping intake tube into the top half2. Then, insert the telescoping intake tube in place on the pump case3. If you wish to hang a heater on the filter, press the sides of the filter4. Pull down to remove the pump housing5. Slide in the heater holder to the bottom of the filter housing6. The heater holder can be inserted to face up or down depending on the desired position of the heater. Insert the pump’s cable into the guides.7. Before re-placing the pump’s housing8. Screw the filter leveling dial into the bottom of the filter housing to prepare to hang and level the filter9. Place the filter on the aquarium edge and adjust the leveling dial by screwing or unscrewing it until the filter is level with the aquarium10. Insert the pump cord into the guides and run the cord to the outlet making certain to form a drip loop
Safety
Safety
- Caution: Close supervision is necessary when any appliance is used by or near children. The filter has not been designed for use by children or mentally challenged individuals. Appropriate adult supervision or persons responsible for personal safety is required.
- Safety Warnings: 1. Caution: If electrical components of the appliance get wet, unplug the appliance immediately2. If the appliance shows any sign of abnormal water leakage, immediately unplug it from the power source3. Carefully examine the appliance after installation. It should not be plugged in if there is water on parts not intended to be wet.4. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or has been dropped or damaged in any manner5. To avoid the possibility of the appliance plug or receptacle getting wet, position aquarium stand and tank or the fountain to one side of a wall-mounted receptacle to prevent water from dripping onto the receptacle or plug. A “drip-loop” shown in fig. A should be arranged by the user for each cord connecting an aquarium appliance to a receptacle. The “drip-loop” is the part of the cord below the level of the receptacle or the connector if an extension cord is used, to prevent water traveling along the cord and coming in contact with the receptacle. If the plug or receptacle does get wet, DON’T unplug the cord. Disconnect the fuse or circuit breaker that supplies power to appliance. Then unplug and examine for presence of water in the receptacle.6. To avoid injury, do not contact moving parts or hot parts such as heaters, reflectors, lamp bulbs and the like7. Always unplug an appliance from an outlet when not in use, before putting on or taking off parts and before cleaning. Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect. 8. Do not use an appliance for other than intended use. The use of attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition.9. Do not install or store the appliances where it will be exposed to the weather or to temperatures below freezing10. Make sure an appliance mounted on a tank is securely installed before operating it11. Read and observe all the important notices of the appliance12. If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.13. This appliance has a polarized plug (one blade is wider than other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat this safety feature.
Specifications
Specifications
- Benefits: 1. Low wattage to high flow ratio allows for power savings with excellent circulation2. Silent operation for even the quietest home or office environment3. Self-priming pump allows for reliable easy start up4. Low maintenance for ease of long-term aquarium care5. Self-cleaning impeller reducing need for pump maintenance6. Non-corrosive parts allow for use in freshwater or saltwater aquariums7. Exceptional high capacity filter basket allows for use of virtually any filter media8. Included Seachem Matrix bio-media completely removes ammonia, nitrite and nitrate9. Removable filter basket allows for easy remote cleaning10. Filter cover doubles as a secure tray for filter basket to avoid spilling while remote cleaning11. Ventilation slots allow even airflow and enhanced gas exchange12. Compressed profile reduces interference with aquarium placement13. Leveling dial allows for exact positioning on aquarium wall14. Surface skimming pulls floating organics and scum from aquarium surface15. Adjustable flow rate allows for versatile use in a range of aquarium environments16. Adjustable intake from surface vs. depth allows for focus on specific filtered area17. Telescoping intake allows for intake at any depth18. Heater holder clip allows for secure and even heat dispersion through the filter’s flow19. Return flow wall offers aeration slots to increase redox and aeration of aquarium20. Maintenance monitor shows when the filter basket needs cleaning
- Compatible Tank size: 75 Gallons
- Filter Types: Biological; Chemical; Mechanical
- GPH: 350 Gallons
- Wattage: 8 Watts