• Blue, 1ea/LG
1 1

RADIO SYSTEMS CORPORATION

Solvit Products CareLift Full Body Dog Harness

SKU: PT0160600084

Blue, 1ea/LG

$52.99 USD
$41.99 USD $52.99 USD
Sale Sold out

For older, injured or invalid dogs, the CareLift lifting harness provides a convenient and safe way to improve pet's mobility. The harness can be used with the rear section only, front section only, or with both front and rear sections for dogs that need more assistance.

Dimension

  • Product Gross Weight: 2.2000 lb
  • Product Net Weight: 2.2000 lb
  • Product Height: 3.50 in
  • Product Length: 9.50 in
  • Product Width: 6.25 in
  • Capacity: 70 - 130 lbs

Instruction

  • Use Instructions: To place Front section on dog: Un-fasten the plastic buckle near the rubberized handle, lay the chest panel on the ground then help your dog “step” into the openings on either side of the chest panel. Lift the straps on either side of the chest panel and place the top lifting panel behind the dog’s neck and connect the plastic buckle piece on the lifting panel with the buckle on the leg straps. The dog can now be assisted by lifting the rear leash or by using either of therubberized handles. When not in use, the rear Lifting Leash can be connected to the D-ring on the Front Lifting Panel (see image below). With the Rear and Front sections joined this way, the Full-Body harness can be left in place all day (not 24x7), making it easy to quickly provide assistance when necessary. If the Frontsection is not installed, the Rear section should be removed when not in use. To place Rear section on dog: Un-fasten the plastic buckle connector on one side of the belly band and on each leg loop. Place the lifting panel on the back of the dog a few inches in front of the base of the tail. Wrap the belly band around the abdomen and connect on opposite side, then run each leg strap under a leg and connect to the rear of the lifting panel. Adjust straps and check for fit – the harness should be snug but not too tight. For improved fit, the leg loops have a swiveling connector on the front end of the loop. This connector can be placed in different positions on the Rear Lifting Panel (two positions on Medium, three positions on Large). To re-position the connector, refer to the images below and follow these instructions: 1) slide the yoke piece forward to disengage from the “peg” on the pivot piece.2) unfold pivot piece so it can be slid out of place on the strap, then re-insert into another position on the strap.3) fold the pivot piece back into position and slide the yoke piece over the peg on the pivot piece to finish.
  • Care and Cleaning Instructions: The belly band and leg loops are removable and machine washable. Remove male protector piece from belly band and wash it separately in soapy water.

Safety

  • Caution: To avoid injury, take extreme care when lifting your dog. Beware of weight shift which might result in a loss of balance. Know your limitations. Always lift with your legs, not your back. Also, if leaving the harness on your dog for long periods, check often to make sure the harness does not irritate their skin or create sores.

Specifications

  • Maximum Animal Chest Width: 46 Inches
  • Maximum Animal Weight: 130 Pounds
  • Minimum Animal Chest Width: 31 Inches
  • Minimum Animal Weight: 70 Pounds
  • Pattern: Solid